Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 969 / 2288

Purpose Command or Action
• enable — Use the enable password for authentication. Before you can use
this authentication method, you must define an enable password by using
the
enable password global configuration command.
• group — Uses authentication. Before you can use
this authentication method, you must configure the server.
For more information, see the
Identifying the Server Host
and Setting the Authentication Key, on page 883 .
•
line
—
Use the line password for authentication. Before you can use this
authentication method, you must define a line password. Use the
password password line configuration command.
• local — Use the local username database for authentication. You must
enter username information in the database. Use the username password
global configuration command.
•
local-case
—
Use a case-sensitive local username database for
authentication. You must enter username information in the database by
using the
username name password global configuration command.
•
none
—
Do not use any authentication for login.
Enters line configuration mode, and configures the lines to which you want
to apply the authentication list. line [ console | tty | vty ] line-number
[ ending-line-number ]
Example:
Switch(config)# line 2 4
Step 5
Applies the authentication list to a line or set of lines. login authentication { default |
list-name }
Step 6
• If you specify default , use the default list created with the aaa
authentication login command.
Example:
Switch(config-line)#
login
• For list-name , specify the list created with the aaa authentication login
command.
authentication default
Returns to privileged EXEC mode.
end
Example:
Switch(config-line)# end
Step 7
Verifies your entries. show running-config
Example:
Switch# show running-config
Step 8
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
887
How to Configure