Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 2013 / 2288

Syntax
event_register_rpc [queue_priority {normal | low | high | last}] [maxrun <sec.msec>] [nice
{0 | 1}] [default <sec.msec>]
Arguments
(Optional) Priority level at which the script will be
queued:
• queue_priority low--Specifies that the script is
to be queued at the lowest of the three priority
levels.
• queue_priority normal--Specifies that the script
is to be queued at a priority level greater than
low priority but less than high priority.
• queue_priority high--Specifies that the script is
to be queued at the highest of the three priority
levels.
• queue_priority last--Specifies that the script is
to be queued at the lowest priority level.
If more than one script is registered with the
"queue_priority_last" argument set, these scripts will
execute in the order in which the events are published.
The queue_priority argument specifies the
queuing priority, but not the execution
priority, of the script being registered. Note
If this argument is not specified, the default queuing
priority is normal.
queue_priority
(Optional) Maximum run time of the script (specified
in SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the default
20-second run-time limit is used. maxrun
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0. nice
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1931
event_register_rpc