Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 1958 / 2288

(Optional) Maximum run time of the script (specified
in SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the default
20-second run-time limit is used. maxrun
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0. nice
If multiple conditions are specified, the CLI event will be raised when all the conditions are matched.
Result String
None
Set _cerrno
No
This policy runs before the CLI command is executed. For example, suppose policy_CLI is registered to
run when the
copy command is entered. When the copy command is entered, the CLI event detector finds
a pattern match and triggers this policy to run. When the policy execution ends, the CLI event detector
determines if the
copy command needs to be executed according to "sync", "skip" (set in the policy), and
the exit status of the policy execution if needed.
Note
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u
event_severity %u msg {%s} msg_count %d line %u key %u tty %u error_code %u"
Description Event Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
Type of event. event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, at which the
event was published to the EEM. event_pub_sec event_pub_msec
The severity of the event.
event_severity
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1876
event_register_cli