Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 650 / 2288

Table 69: Default DSCP Output 8 Queue Threshold Map
4 Egress Queue Mapping Threshold ID Egress Queue DSCP
2 1 2 0-7
2 1 3 8-15
3 1 4 16-23
3 1 5 24-31
4 1 6 32-39
1 1 1 40-47
4 1 7 48-55
4 1 8 56-63
Related Topics
Enabling QoS Globally, on page 571
Standard QoS Default Configuration, on page 563
Default Mapping Table Configuration
The default DSCP-to-DSCP-mutation map is a null map, which maps an incoming DSCP value to the same
DSCP value.
The default policed-DSCP map is a null map, which maps an incoming DSCP value to the same DSCP value
(no markdown).
Related Topics
Default CoS-to-DSCP Map, on page 568
Default IP-Precedence-to-DSCP Map, on page 569
Default DSCP-to-CoS Map, on page 570
DSCP Maps
Default CoS-to-DSCP Map
You use the CoS-to-DSCP map to map CoS values in incoming packets to a DSCP value that QoS uses
internally to represent the priority of the traffic. The following table shows the default CoS-to-DSCP map. If
these values are not appropriate for your network, you need to modify them.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
568
Information About QoS