Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 2009 / 2288

Event_reqinfo
"event_id %u event_type %u event_type_string {%s} %u event_pub_sec %u event_pub_msec %u"
"event {%s}"
Description Event Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id. event_id
Type of event. event_type
An ASCII string that represents the name of the event
for this event type. event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM. event_pub_sec event_pub_msec
RF progression or status event notification that caused
this event to be published.
event
event_register_routing
Registers for an event that is triggered by the event routing command. These events are handled by the routing
event detector to publish an event when route entries change in Routing Information Base (RIB) infrastructure.
Use this Tcl command extension to run a routing policy for this script. The network IP address for the route
to be monitored must be specified.
Syntax
event_register_routing [tag ?] network ? length [ge|le|ne] [type add|remove|modify|all]
[protocol ?] [queue_priority normal|low|high|last] [maxrun ?] [nice {0 | 1}]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script. tag
Specifies the network IP address. The network
number can be any valid IP address or prefix. network
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1927
event_register_routing