Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 1855 / 2288

Purpose Command or Action
Example:
Device(config)# event manager policy
tm_cli_cmd.tcl type system
• Use the system keyword to register a Cisco-defined system
policy.
• Use the
user
keyword to register a user-defined system
policy.
• Use the
trap
keyword to generate an SNMP trap when the
policy is triggered.
• In this example, the sample EEM policy named
tm_cli_cmd.tcl is registered as a system policy.
Exits global configuration mode and returns to privileged EXEC
mode.
exit
Example:
Device(config)# exit
Step 7
Examples
In the following example, the show event manager environment privileged EXEC command is used to
display the name and value of all EEM environment variables.
Device# show event manager environment all
No. Name Value
1 _cron_entry 0-59/2 0-23/1 * * 0-6
2 _show_cmd show ver
3 _syslog_pattern .*UPDOWN.*Ethernet1/0.*
4 _config_cmd1 interface Ethernet1/0
5 _config_cmd2 no shut
Displaying EEM Registered Policies
Perform this optional task to display EEM registered policies.
SUMMARY STEPS
1. enable
2.
show event manager policy registered
[
event-type event-name
] [
time-ordered
|
name-ordered
] [
detailed
policy-filename ]
DETAILED STEPS
Step 1
enable
Enables privileged EXEC mode. Enter your password if prompted.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1773
How to Write Embedded Event Manager Policies Using Tcl