Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 1166 / 2288

SUMMARY STEPS
1.
enable
2. configure terminal
3.
aaa new-model
4.
aaa authentication login
{
default
| list-name } method1 [ method2... ]
5. aaa authorization { network | exec | commands level | reverse-access | configuration } { default |
list-name } [ method1 [ method2... ]]
6.
username name [ privilege level ] password encryption-type encrypted-password
7. ip scp server enable
8. exit
9.
show running-config
10. debug ip scp
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Sets AAA authentication at login. aaa new-model
Example:
Device(config)# aaa new-model
Step 3
Enables the AAA access control system. aaa authentication login { default | list-name } method1
[ method2... ]
Step 4
Example:
Device(config)# aaa authentication login default
group
Sets parameters that restrict user access to a network. aaa authorization { network | exec | commands level |
reverse-access | configuration } { default | list-name }
[ method1 [ method2... ]]
Step 5
The exec keyword runs authorization to
determine if the user is allowed to run an EXEC
shell; therefore, you must use the
exec keyword
when you configure SCP.
Note
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1084
How to Configure Secure Shell