Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 1490 / 2288

Purpose Command or Action
(Optional) Configures the port control as
unidirectional or bidirectional. authentication control-direction { both | in }
Example:
Switch(config-if)#
authentication control-direction
Step 4
both
(Optional) Configures a port to use web authentication
as a fallback method for clients that do not support
802.1x authentication.
authentication fallback name
Example:
Switch(config-if)# authentication fallback profile1
Step 5
(Optional) Sets the authorization manager mode on a
port. authentication host-mode [ multi-auth | multi-domain |
multi-host | single-host ]
Example:
Switch(config-if)# authentication host-mode
Step 6
multi-auth
(Optional) Enables or disable open access on a port. authentication open
Example:
Switch(config-if)#
authentication open
Step 7
(Optional) Sets the order of authentication methods
used on a port. authentication order [ dot1x | mab ] | { webauth }
Example:
Switch(config-if)# authentication order dot1x
Step 8
webauth
(Optional) Enables or disable reauthentication on a
port. authentication periodic
Example:
Switch(config-if)# authentication periodic
Step 9
(Optional) Enables manual control of the port
authorization state.
authentication port-control
{
auto
|
force-authorized
|
force-un authorized }
Example:
Switch(config-if)#
authentication port-control auto
Step 10
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1408
How to Configure 802.1x Port-Based Authentication