Circutor AFQm Series, Инструкция по эксплуатации

Страница: 54 / 108

54
AFQm
Instruction Manual
Table 20 (Cont�) : Alarm messages�
Alarm messages
High temp Inductor
Description The temperature of the inductors is very high.
Corrective
action
Check that the fans are working. Clean or replace the fans if necessary. If it continues, contact
the TAS�
Resonance
Description Detection of a potential resonance with a load
Corrective
action
The resonance detection function can be activated erroneously in installations with a very high
voltage THD. Contact the TAS .
Initial Conditions
Description The start-up conditions have not been met 10 times during the past 5 minutes.
Corrective
action
Check the configuration and the ambient temperature. Check the quality of the power supply
voltage. If it persists, contact the TAS�
Internal communications
Description Failure in internal communications.
Corrective
action
Restart. Contact the TAS .
Hardware failure
Description The self-diagnostic system has detected a fault.
Corrective
action
Contact the TAS .
Exxx or Cxxx
Description
Internal error.
Corrective
action
Contact the
TAS
.
6.14.- WARNINGS
Note: This screen is not visible on the “slave” devices.
When the device generates a warning, it will continue to operate, but the symbol will be
displayed on the main screen.
On pressing the key; if there are active warnings, the screen shown in
Figure 54
, will be
displayed and the user will be asked for confirmation to continue with the filter start-up process.
Figure 54: Confirm screen.