Circutor AFQm Series, Инструкция по эксплуатации

Страница: 17 / 108

17 Instruction Manual
AFQm
300
500
65
65
15
15
Fixing screws
Fixing screws
Figure 5: Installation Wall-type AFQm�
Use 4 M8 fixing screws.
The ventilation grilles must not obstructed or covered at any time.
3�4�2�- RACK-TYPE AFQm
The Rack-type AFQm should be installed in a 19” rack cabinet.
The height of the device is equivalent to 9U. (U is the rack unit, 1U = 4.445 cm)
You can install more than one AFQm in a single cabinet.
Follow these steps to install it inside the cabinet:
1�- Extend the rack cabinet’s anti-tip feet.
Unless the rack cabinet is secured to the floor, the anti-tip feet have to be extend -
ed and fixed to the floor, to ensure maximum safety during the assembly process.
2�- Open or remove the door at the front of the cabinet.
3�- Place the AFQm on the cabinet’s rails or shelves. Make sure that they are suitable for the
weight of the device; use cross braces if necessary.
Do not use front handles to carry the module.