Circutor AFQm Series, Инструкция по эксплуатации

Страница: 7 / 108

7 Instruction Manual
AFQm
1�- VERIFICATION UPON RECEPTION
1.1.- RECEPTION PROTOCOL
Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- Instruction manual
- Communication cable for connecting devices in parallel.(Models AFQm Wall
and Rack type).
e) Perform an external and internal visual inspection of the device prior to connecting it.
If any problem is noticed upon reception, immediately contact the transport
company and/or CIRCUTOR's after-sales service.
1.2.- TRANSPORT AND HANDLING
The transport, loading and unloading and handling of the device must be car-
ried out with proper precautions and using the proper manual and mechanical
tools so as not to damage it.
If the device is not to be immediately installed, it must be stored at a location
with a firm and level floor, and the storage conditions listed in the technical
features section must be observed. In this case, it is recommended that the
device be stored with its original protective packaging.
To move the device a short distance, the device's floor support profiles facilitate handling with a
pallet jack or forklift. (
Figure 1
)
Figure 1: Transport with pallet jack�