Circutor AFQm Series, Инструкция по эксплуатации

Страница: 59 / 108

59 Instruction Manual
AFQm
6.18.- SLAVE DEVICE STATUS
Note:
This screen is not visible on the
“slave”
devices.
Note: This screen is only displayed if a system has been configured with devices in parallel.
This screen,
Figure 60,
shows the status of each “ slave ” device.
Figure 60: Slave device status screen (1)�
The “ slave ” to be checked can be selected from the top tab, by serial number.
Select the “ slave ”; the screen shown in
Figure 61
will be displayed. This screen shows the
Model, Type and Serial number of the device, as well as its status, active alarms and the tem-
perature of the IGBTs and inductors.
Figure 61: Slave device status screen (2)�
Note: If there is a communication error, the message “ Communication error ” will appear when
you select the affected device.