OPERATOR MANUAL
2.
General information
3
2.
General information
2.1
General features
METAL EMBOSSER is an automatic feeder (METAL EMBOSSER 2000) embossing and punching machine
for metallic plates which use for the identification of industrial products. A small backup battery supplies
the charge for the memory thus permitting all information to be saved and ready for subsequent use
even if the machine has been switched off.
The METAL EMBOSSER system consists in an embosser unit driven by a personal Computer (not
supplied) connected to a Computer with an USB port by means of the dedicated CIM software named
“PowerTag”.
The system may also run in offline mode (STAND-ALONE), without software, to facilitate setting
operations.
The STAND-ALONE mode provides the possibility to enter data in two different ways:
-
Touch screen LCD display (resolution 800x480)
-
USB keyboard
Any other different usage of the embosser is not permitted.
