5.
Human Machine Interface
5.1
Introduction
ME2000S
is a highly technological embosser that offers maximum functionality and wide operability to
meet all the requirements of the metal plates embossers industry
The machine allows to set up and perform a job, set its options and parameters, also verify the
functioning of some of its electrical and mechanical components.
To do so the operator uses the console loc
5.2
Main screen
This screen is always displayed by the embosser except when you enter one of the functions of the
“MAIN MENU”.
When the embosser is in READY
access the various functions available
Simply press on the icons on the touch screen
It is possible to access it also when
The functions contained in the “MAIN
LCD EDIT
Option for the user to
SETUP
Option for the user
various parameters
SERVICE
Option for specialized technical
machine components
5.
Human Machine Interface
uman Machine Interface
is a highly technological embosser that offers maximum functionality and wide operability to
requirements of the metal plates embossers industry.
The machine allows to set up and perform a job, set its options and parameters, also verify the
functioning of some of its electrical and mechanical components.
To do so the operator uses the console located on the front side of the panel.
This screen is always displayed by the embosser except when you enter one of the functions of the
READY status, the d isplay shows "MAIN MENU", thus
available on the machine.
icons on the touch screen corresponding to the required option.
when the machine is in ON status.
“MAIN MENU” are:
to plan work and start production.
but especially for specialized technical staff to set
parameters and the machine configuration.
specialized technical staff to check the functionality of the various
components and run possible updating.
OPERATOR MANUAL
Human Machine Interface
25
is a highly technological embosser that offers maximum functionality and wide operability to
The machine allows to set up and perform a job, set its options and parameters, also verify the
This screen is always displayed by the embosser except when you enter one of the functions of the
thus allowing the user to
option.
set up the
the various
