OPERATOR MANUAL
5.
Human Machine Interface
38
5.4.1
Configuration [F1]
The option allows to set the general parameters of the machine.
From “SETUP” menu press
or
[F1]
•
Measure unit
Unit of measurement adopted for X and Y coordinates of the fields.
Unit in millimetres or inches
•
Address
communication address with PC
•
Path
It sets the way to drive the axes: by punch, by line or according the path optimization algorithm.
•
Hide protected data
It does not display the data of protected fields.
When leaving the page, the saving of the data is required if they changed. By pressing the ESC
key, the modifications are cancelled while by pressing the ENTER key they will be saved.
•
Unloader full alarm:
o
YES
machine stop automatically when unloader is going to be full
o
NO
machine ignore the unloader when full and continue production
