OPERATOR MANUAL
1.
How to use the manual
1
1.
How to use the manual
1.1
Importance of the manual
The present manual contains the instructions for the start
-
up, use and maintenance of the embosser
ME2000S.
Before installing and starting up the machine it is necessary to read carefully all the instructions
contained here.
The effectiveness of the servicing strictly depends on properly and systematically following the
indications herein.
Please, remember that in case of problems or faults the TECHNICAL SUPPORT SERVICE of MF Group srl -
CIM division is always at your complete disposal for any explanation or assistance.
Therefore
,
MF Group srl - CIM division accept no responsibilities in case of wrong or inappropriate use.
MF Group srl - CIM division reserves the right to make changes at any time for the purpose of product
improvement without notice.
Make sure that any modification or updating of the Manual you receive is added to the text.
MF Group srl – CIM division is not liable for technical or editorial errors or omissions contained herein.
1.2
How to keep the manual
Do not remove, tear out or rewrite parts of the manual for any reasons. Keep the manual in a dry and
cool place
.
1.3
How to consult the manual
This manual consists of:
•
COVER PAGE IDENTIFYING THE TYPE OF PRODUCT
•
TABLE OF CONTENTS
•
INSTRUCTIONS AND/OR NOTES ON THE PRODUCT
By referring to the COVER you can identify the model of the embosser described in the manual.
Referring to the TABLE OF CONTENTS you can find the CHAPTERS and the PARAGRAPHS where you can
read all the notes regarding a given topic.
All INSTRUCTIONS AND/OR NOTES ON THE PRODUCT aim at identifying safety warnings, correct
procedures and operational qualifications required for a proper servicing of the embossers.
Moreover
,
we would like to underline that some images contained in the manual to make the
identification of the described parts easier might not look exactly as the embosser you purchased.
