OPERATOR MANUAL
9.
Maintenance
65
Lubricate slightly (just a few oil drops) the rail
of the carriage of the Y axis clamp after
cleaning it accurately with a cloth and after
removing the dust.
Then manually move the carriage to spread the
oil evenly and check that the carriage slides
smoothly.
If during this operation frictions occur, contact
the technical service
Use only liquid synthetic oil with a viscosity of
about 60-68 mm
2
/sec at 40°
Oil the holes of the plate loader group shown
in the figure.
About every 6 months:
a greasing of the internal mechanical parts is
necessary. However, it can be done exclusively
by specialized technical staff.
Every year:
Have the specialized technical staff perform a
complete preventive maintenance work,
including a test of all the moving mechanical
parts and their components such as belts,
springs, bearings, bushings and characters.
The maintenance should also include an
inspection of all electrical supplies and the
various setup parameters of the machine.
