OPERATOR MANUAL
3.
Unpacking
18
The machine is delivered in a wooden
packing case.
This is due to its dimensions and weight and
avoids the risk of damage to the machine.
All displacements should be done by a
forklift or therefore always by two persons,
because the gross weight is about 96kg.
To unpack the machine as shown in figure
please follow the instructions below.
•
Remove the four side screws (1) with a 10mm wrench (es. UNI 6763) and remove the cover.
•
Take the 19mm fork wrench (es. UNI 6736) which is fixed on top of the machine by on adhesive
band.
•
Remove the crews from the bottom of the case (2) with the 19 wrenches.
•
Having removed the screws, the machine can be lifted up and placed on the worktable. This
operation should be done with two persons.
•
Once the machine has been finally positioned, the cellophane can be removed. Open the
envelope which contains the Cd of manual and software and the key for the front cover.
•
Remove the keyboard and with the above-mentioned key open the front cover and remove the
elastic bands which hold the pincer.
•
Please refer to the next paragraph in order to check all the accessories.
