4.6
Power on and checking
After the installation you can get power to the machine turning the
Start cycle:
When starting
ME2000S
performs a reset and self
display.
After about 20 seconds on the display appear “LOADING” window
Once finished the start-up, on the start screen appear:
Touch
to activate
ME2000S
The “reset” cycle start. Unused tag of previous job will
“0” position.
Once completed this step,
ME2000S
Power on and checking
After the installation you can get power to the machine turning the main switch ON
performs a reset and self-test cycle, without showing any message on the
fter about 20 seconds on the display appear “LOADING” window:
the start screen appear:
2000S
.
The “reset” cycle start. Unused tag of previous job will discard, and the HOME procedure bring the axis at
2000S
is ready and the display goes on the Main Menu
OPERATOR MANUAL
4.
Installation
23
ON
test cycle, without showing any message on the
and the HOME procedure bring the axis at
is ready and the display goes on the Main Menu:
