Chell FlightDaq-TL, Инструкция по установке и эксплуатации

Страница: 19 / 52

Page 18
5 FlightDaq-TL Configuration Webserver
5.1 Introduction.
The FlightDaq-TL features an Ethernet interface that is used for configuration
and data output. Data output can be the Chell standard protocol (via TCP or
UDP), IENA (over UDP) and DDS. Most protocols support configuration as well
as data output so that the operation of the unit can be modified in use.
For initial configuration and demonstration, the FlightDaq-TL has an inbuilt web-
server which provides an easy to use and powerful interface to the FlightDaq-
TL.
The webserver is divided by tabs into five areas of functionality, namely 'Setup’,
'Live Data', ‘Channel Configuration’, ‘Advanced’, and ‘Factory Tools’.
'Setup' provides the means to set FlightDaq-TL’s main operating parameters
such as data streaming rates and device comms addresses.
The unit's function may be checked and demonstrated using 'Live Data' to show
the raw readings and FlightDaq-TL’s calibrated output.
‘Advanced’ provides setup for the all other more advance parameters that may
require configuration on a per application basis.
‘Channel Configuration’ allows to user to configure each of the 16 channels for
the correct input types.
‘Factory Tools’ provides some lower level configuration. This tab is password
protected and therefore not readily available to everyone and further detail is
beyond the scope of this document.