Chell FlightDaq-TL, Инструкция по установке и эксплуатации

Страница: 23 / 52

Page 22
5.4.3 General Ethernet Comms
The General Ethernet Comms parameters for static i/p addresses are shown in
Figure 5.42. The options in this section control the FlightDaq-TL’s IP address,
subnet mask and Local port.
Figure 5.42, TCP Comms group
'IP Address' IP address allocated to FlightDaq-TL on the user's
network.
'Subnet' Subnet mask as set on the user's network.
‘Local port’ Local port of the device (fixed to 101).
‘Apply TCP’ Applies the settings to the local memory
Table 5.42, TCP Comms group settings
DHCP can be selected by clicking the radio button. In this configuration, the i/p
address and subnet address cannot be edited as below.
Figure 5.43, DHCP Comms