Chell FlightDaq-TL, Инструкция по установке и эксплуатации

Страница: 22 / 52

Page 21
5.4 The 'Setup Parameters' Page
5.4.1 Introduction
The 'Setup Parameters' page shows all of the FlightDaq-TL's main operating
parameters. Setup Parameters is divided into different categories by function,
and each category is detailed separately in the following.
5.4.2 Data Streaming
The ‘Data Streaming’ section allows the user to change settings that affect both
communication protocols, and allows the user to choose the protocol that is to
be used, along with the data transfer rate.
Figure 5.41, Data Steaming Setup
Control Function
‘Comms Protocol’
radio button Chooses the communication protocol that is to be used.
This button changes what options are available below it.
‘Data Rate’ option list Selects the rate at which the FlightDaq-TL will
automatically transmit data after reset.
‘Protocol’ option list Selects the format that the data will be transmitted as,
options are 32 bit LE & 32-bit BE.
‘Apply’ button Applies the changes made to the local settings memory.
Active channels Displays the number of active channels that will be
transmitted. The user can choose between transmitting
the 16 primary channels only or all primary and
secondary channels.
Table 5.41, Data Streaming settings.