Chell FlightDaq-TL, Инструкция по установке и эксплуатации

Страница: 26 / 52

Page 25
5.7 The ‘Channel Configuration’ tab
5.7.1 Introduction
The channel configuration tab is used to configure each channel of the
FlightDaq-TL in terms of measurement type and calibration. It is shown below
in figure 5.71.
Figure 5.71, Channel Configuration Page
5.7.2 The summary tables
The summary table appears at the top of the Channel Configuration tab and
gives the user a quick summary of the current configuration of the primary
channels as shown below in figure 5.72.
Figure 5.72, Channel Configuration summary.
Each channel is labelled with its current type.
NOTE: When a channel is configured as ‘External’ for a Smart Lemo®, the box
surrounding the channel type will become red to acknowledge that a Smart
Lemo® has been found and its contents downloaded.