Chell FlightDaq-TL, Инструкция по установке и эксплуатации

Страница: 40 / 52

Page 39
5.9.2 IENA Configuration
Figure 5.94, IENA Configuration group.
‘IENA Key’ The key at the start of an IENA packet, the most
significant byte is entered first.
‘End word’ The value to signify the end of an IENA packet, the most
significant byte is entered first.
5.9.3 Time Stamping
This page allows the user to edit the timestamp settings of the FlightDaq-TL.
This timestamp will allow the user to get millisecond level accuracy timestamps
on the data packets. If the timestamp is enabled it will have an effect on the
maximum transmission rate.
Figure 5.95, Timestamp
‘PTP synchronisation
on’ checkbox This allows the user to select whether any
timestamps that may be added to the data
stream are PTP synchronised or not. Please
note this will only work if there is a PTP
grandmaster on the same network as the
FlightDaq-TL.
‘Data stream
timestamp’ dropbox The user can use this to select where the
timestamp is positioned in the data stream,
either none which will turn the timestamp off,
start of cycle which will place a timestamp at
the beginning of all the channels and every