Chell FlightDaq-TL, Инструкция по установке и эксплуатации

Страница: 21 / 52

Page 20
5.3 Common Controls Sidebar
Figure 5.21 above shows the first page viewed when navigating to the
webserver. It includes the common controls sidebar and the main group of setup
parameters. The sidebar provides information on the FlightDaq-TL unit,
including serial number and current firmware revision. The function of the
common controls is detailed in the subsequent table (Table 5.31)
Table 5.31, Common sidebar control functions.
Control Function
'RESET'
button Resets the FlightDaq-TL , similar to power
cycling the device. Use to activate new
settings and/or rebuild calibration tables. The
option exists for a hard reset and a soft reset. A
hard reset will re-start the operating system
within the FlightDaq-TL and is required when
low-level changes are made such as the i/p
address. A soft reset will restart with modified
settings and is suitable for changes to channel
configuration, etc. A soft reset will take around
20 seconds but a hard reset will take around 90
seconds.
'Rezero'
button This will re-zero channels that are suitable for a
re-zero function.