1
Programming Quick Guide
-DC9250K:
Docking Scanner
Docking Scanner:
Gently tap the trigger area at the middle of scanner, to enable the
scanner (for reading barcode)
Up Side
Lower Side
The touch sensor area is around middle of the scanner as drawing shown.
Installation
They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please from A1 to A14 for USB HID or B1 to B13 for
USB Serial. This will reset the scanner to its factory defaults.
USB HID
RS232/
USB
serial
A1
B1
A2
B2
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
A8
B8
A9
B9
A10
B10
A11
B11
A12
B12
A13
B13
A14
Trigger
Area
