background image

 VICON

t

REF. NOTES

SHEET NO. REV.

SEC.

SUPERCEDES

INSTRUCTIONS FOR

X328-384

X328

885

1

INSTALLATION AND OPERATION 

MODEL 

 AND 

 SERIES 

 SCANNERS   MICROSCAN,

GENERAL

SCOPE

The information in this instruction manual covers the installa-
tion, operation, and maintenance of the following indoor
scanners:

V32 1 OAP
V32 1 O-24AP

Throughout this manual, 

 is used to refer to all

light-duty scanner models. 

 is used to refer to all

medium-duty scanners. Both models have round mounting
bases.

These units should be installed using approved materials
and wiring practices in accordance with the National
Electrical Code and applicable local wiring ordinances.

 INDOOR SCANNER

INTRODUCTION

tion-free operation. These injection-molded scanners have

The 

 and the 

 Series Scanners are 

both a permanent stop to permit full 360 degrees  rotation

continuous-duty units rated for loads up to 15 pounds

and adjustable limit stops to set  pan travel limits ar desired.

 and 25 pounds 

 respectively, when

mounted in either the upright or inverted positions. 

The scanners are energized using the appropriate control

speed,  high-torque drive motors with instant start-stop

units. Refer to Table   A line cord option (Model 

 is

characteristics provide operational stability without coast.

available for the 

 and 

 models enabling

Drive trains made with acetal output gears provide 

them to 

 without the use of a control unit.

TABLE I

SCANNER/CONTROL COMPATIBILITY AND OPERATING DISTANCES

Control Model

Scanner Model

Working Voltage*

Wire Size (AWG)

Annealed Copper

Maximum Distance

   

 

2 2

10,000 (3,048)

2 2

5,000 (1,524)

2 2

1,000 (305)

24V 

2 0

1,500 (457)

18

2,500 (762)

16

4.000 (1,219)

2 2

3 5 0 (107)

24V 

2 0

5 5 0 (167)

18

9 0 0 (274)

16

1,400 (427)

*Working voltage refers to the voltage carried by the cable entering scanner

WARNING: TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Product specifications subject to change without notice.

VICON INDUSTRIES, 

INC. 525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 

 (516) 293-2200TELEX: 144581

TOLL FREE: 

 

(OUTSIDE OF NEW YORK)

Содержание V3200AP Series








Отзывы: