FC75
QUICK START GUIDE
Scan this series of barcodes to switch to Tab Mode (continued on next page).
1
0
0
Tab Mode
Tab Mode Start
You may wish to set your scanner to “Tab Mode.” In this
mode, data will tab over to the next column as you scan
instead of jumping to the next line. Scan here to begin.
TAB MODE Start
TAB MODE
Tab Mode
The following section covers the most common configuration settings for
your FC75 scanner.
For additional configuration options please visit
unitechscanners.com/FC75 and select the “Download” tab.
You will find the User’s Manual and a variety of other resources.
SEttings and configuration
Tab Mode
Open a word processing program such as Microsoft Word or Notepad on
your host. Now scan the following barcode:
If the word “Unitech” appears on the screen you have succesfully installed
your scanner. Congratulations!
TEST AND FINISH
Step 3:
Plug the FC75’s interface cable into a USB port of a
host computer.
*Your host computer may take a moment to recognize
the FC75 scanner.
connectING THE FC75 TO A HOST COMPUTER
Step 1:
Tab Mode
Guide the four screws into the
holes in the hands-free stand.
Use a screwdriver to finish the
installation.
*The hands-free stand is an
optional accessory
Mounting the FC75 (hands free scanning)
Step 2:
(4) M3X5 SCREWS
FC75
