FC75
QUICK START GUIDE
Tab Mode
Scan this series of barcodes to switch to Enter Mode.
1
0
1
3
Enter Mode
Tab Mode
Tab Mode Finish
Scan here to enter your settings.
You are now in Tab Mode.
tab mode finish
Tab Mode
Enter Mode Start
You may wish to switch back to “Enter Mode.”
Scan here to begin.
enter mode
Scan here to return your scanner to its original factory settings, a useful
feature for troubleshooting purposes.
Scan here to enter your settings. You are now in Enter Mode.
Enter Barcode
The FC75 is a plug-and-play scanner. It does not require a driver and
should be recognized as a generic HID device by your computer, similar
to a standard keyboard. This allows you to scan into any field that you
could normally type into.
Unitech’s professional support team is available to quickly answer
questions or technical-related issues. Should equipment issues occur,
please contact a Unitech Support Engineer at (800) 861-8648 for more
information.
Tab Mode
Questions / Problems?
Tab Mode
Enter mode finish
Tab Mode
Factory Default
© 2014 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Tab Mode
TAB mode continued
Enter Barcode
Continue Scanning.
9
