Chattanooga Group OPTIFLEX3 2090, Руководство по обслуживанию

Страница: 37 / 48

35
OptiFlex® 3 Continuous Passive Motion (CPM) Therapy Unit
8 MAINTENANCE
8.1 CLEANING THE SYSTEM
With the system disconnected from the power
source, clean the system with a clean, lint free
cloth moistened with water and mild
antibacterial soap. If a more sterile cleaning is
needed, use a cloth moistened with an
antimicrobial
cleaner.
8.2 PREVENTIVE MAINTENANCE
A. The OptiFlex3 CPM unit should be placed on a
regular maintenance, and inspection schedule
based on the practices of the health care
facility.
B. Inspect the OptiFlex3 CPM unit thoroughly
during scheduled maintenance and perform a
functional inspection verifying the calibration
and angle of the unit. Recommended Visual
and Functional Inspection information
can be found in
Sections 5.3 and 5.4 of
Troubleshooting.
Inspection should be performed by a person
qualified to recognize any signs of wear or tear,
looseness of bolts, parts or inconsistencies in
function.
8.3 FACTORY SERVICE
When the OptiFlex3 CPM unit requires factory
service, contact the dealer or Chattanooga
Group Service Department.
WARRANTY REPAIR/OUT OF WARRANTY
REPAIR
1. Written statement containing the following
information:
• RA Number- Obtain from Factory
• System Model Number
• System Serial Number
• Contact Person with Phone and Fax Numbers
• Billing Address (for Out of Warranty Repair)
• Shipping Address (Where to Ship Unit after
Repair)
• Detailed Description of Problem or Symptoms
2. Copy of original invoice issued at purchase of
the System.
3. Ship the unit to address specified by an
authorized service technician.
Service to these units should be performed only
by Service Technicians certified by Chattanooga
Group.
Unplug the unit from the power source before
attempting any removal or replacement procedures
to prevent electrical shock.