Carver 56 Voyager SE, Руководство пользователя

Страница: 61 / 209

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
5627 5/04
2.2.3.1 Forward, Mid and Aft Bilge Pumps
Don’t forget to turn the bilge pumps off when you are done using them.
Leaving a bilge pump on for extended periods of time can cause exces-
sive wear to the pump.
These breakers control the flow of electricity to the forward, amidships
and aft bilge pump switches, respectively, at the pilothouse helm.
A T
IP
F
ROM
C
ARVER
!
A certain amount of water will always collect in your boat’s bilge, especially in
the bilge area where the shaft logs are located. The small amount of water that
normally accumulates is usually not enough to activate the bilge pumps’ auto-
matic float switches. While underway and on plane, use the helm switches to
turn your bilge pumps on manually and let them run for 30 seconds to a minute.
2.2.3.2 Panel Lights
This breaker controls the flow of electricity to the switch that operates
the pilothouse helm’s instrument panel backlights. Turn on the panel
lights when the ambient light level is insufficient to clearly view the
instrument panel.
2.2.3.3 Anchor Lights
This breaker controls the flow of electricity to the switch that operates
the anchor lights.
P
ILOTHOUSE
O
VERHEAD
P
ANEL
560layout