Carver 56 Voyager SE, Руководство пользователя

Страница: 51 / 209

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
5627 5/04
2.2.1.12 Main - Two
This breaker helps protect the circuitry between the Pilothouse Over-
head Panel and the “house” battery bank. This breaker must be “ON” to
provide power to the Pilothouse Overhead Panel.
2.2.1.13 Windlass
This breaker controls the flow of electricity to the controls that operate
the optional windlass. A set of windlass controls are located at both
helms and on the fore deck. To supply power to the controls, switch this
breaker “ON.” Refer to the OEM information for details on operating the
windlass.
NOTE: The windlass circuit also contains an in-line fuse that protects the
windlass switch solenoid. This fuse is located in the anchor chain locker
on the fore deck.
2.2.2 DC Control Center
The DC Control Center, located in a cabinet next to the stairway that
connects the salon and pilothouse, manages the power supply to most of
the boat’s 12-volt equipment. To provide power to this breaker panel:
1. Turn the “house” battery bank master disconnect switch to the “ON”
position.
2. On the Safety Breaker Panel, switch the Main - One and Main - Two
circuit breakers “ON.”
The DC Control Center contains the switches, gauges, and circuit break-
ers described below.
2.2.2.1 Generator
Use this switch to start, stop or preheat the generator.
2.2.2.2 Bilge Blower
Use this switch to operate the four bilge blowers. To provide electricity
to this switch, switch the four Bilge Blower circuit breakers on this panel
“ON.”
2.2.2.3 Grey Water Level Gauge
This gauge indicates the amount of water in the optional grey water
tank. To activate the grey water monitoring system, switch the Grey
Water Monitor circuit breaker on this panel “ON.”