Carver 56 Voyager SE, Руководство пользователя

Страница: 78 / 209

AC E
LECTRICAL
S
YSTEM
S
ECTION
3
5627 5/04
10. A spring-loaded generator STOP/START switch is located at the top
left of the DC Control Center. Push the switch to the “START”
position and hold it there until the generator starts. Release the
switch when the generator starts.
If the generator does not start within 10 seconds, release the STOP/
START switch, wait 1 minute, then try to start the generator again.
11. When the generator is running smoothly, switch the Generator
circuit breaker group(s) on the AC Control Center “ON” to connect
the boat’s AC electrical system to the generator output. If the Gen-
erator Running indicator illuminates, power is now available to the
other circuit breakers on the AC Control Center.
12. To turn the generator “OFF,” push the STOP/START switch to the
“STOP” position. If you do not intend to use the generator again for
at least a few days, turn the generator battery master disconnect
switch to the “OFF” position.
13. To change the boat’s AC power source from the generator to shore
power, switch the Generator circuit breaker group(s) on the AC
Control Center “OFF,” then connect to a shore power source as
described earlier in this section.
Do not inhale generator exhaust. Generator exhaust contains carbon
monoxide, a poisonous gas. Refer to “1.6 Carbon Monoxide Warnings”
for more information on engine exhaust and carbon monoxide.