Carver 56 Voyager SE, Руководство пользователя

Страница: 187 / 209

S
ECTION
8 W
INTERIZATION AND
S
TORAGE
5627 11/03
a. Pour 5 gallons of fresh water through each shower and sink drain.
b. Empty the grey water tanks as described in 4.6 Grey Water
Holding System .
c. Charge the grey water tanks by adding deodorizer. Use the brand
of deodorizer recommended by your Carver Dealer.
8.3.10 Exterior
Wash the exterior of the boat, particularly the underwater portions.
Remove as much aquatic growth as possible while it is still wet. Once the
growth has dried it is more difficult to remove.
Check the zinc sacrificial anodes for deterioration. If the zincs shows
signs of deterioration have them replaced before spring launch. Check
stainless steel rails and fittings for signs of rust. Remove rust prior to
winter lay-up. Inspect the underwater portions of the hull. Review
anything that looks out of the ordinary with your Carver Dealer.
8.3.11 Interior
Air out the cushions and make sure they are dry. Storing damp cushions
leads to mildew. Position the cushions so air can circulate around them.
Purchase and position moisture accumulators throughout the boat. These
help reduce the amount of moisture that accumulates during storage.
Remove everything from the boat that could spoil or freeze while the
boat is stored. Also remove all dried food. Food attracts mice and insects.