Carver 56 Voyager SE, Руководство пользователя

Страница: 122 / 209

I
NTERNAL
S
YSTEMS
S
ECTION
4
5627 12/03
M7088D-3
S
ANITATION
S
YSTEM
- O
VERBOARD
D
ISCHARGE AND
G
REY
W
ATER
H
OLDING
S
YSTEM
Stbd Waste Tank
Grey Water Tank
Selector Y-Valve
Waste Tank
Selector Y-Valve
To Grey Water
Tanks
4.5.2.1 Dockside Discharge
With the dockside discharge method, waste is flushed from the heads to
the waste tanks where it is stored until it can be transferred to a
dockside pumpout station. To empty the tanks:
1. Locate a dockside pumpout station.
2. Remove the port waste tank deck plate labeled “WASTE” using the
removal tool supplied with your boat. This plate is located on the
starboard side deck amidships; it is the more forward “WASTE” deck
plate. Refer to 9.7.2 Deck Plates for the exact location of this plate.
A T
IP
F
ROM
C
ARVER
!
The “WASTE” deck plate is not connected to the fitting and does not float. Be
careful that you don’t drop the plate in the water when you remove it. If you do
lose the plate, you can order a replacement from your Carver Dealer. “WASTE”
deck plates are dropped overboard frequently enough that we suggest you
carry an extra in your onboard spare parts kit.
3. Attach the pumpout vacuum hose to the “WASTE” deck fitting.
Because the transfer process uses a vacuum action, there must be a
secure connection between the transfer hose and the deck fitting.
4. Activate the pumpout vacuum. The pumpout vacuum transfers the
waste to the dockside holding station.