Carver 56 Voyager SE, Руководство пользователя

Страница: 84 / 209

AC E
LECTRICAL
S
YSTEM
S
ECTION
3
5627 5/04
Shore 2 - Switch this breaker group “ON” if you are using a shore power
source to provide electricity to the Line 2 circuit breakers.
Generator (lower) - Switch this breaker group “ON” if you are using the
generator to provide electricity to the Line 2 circuit breakers.
3.3.2.7 Power Available Indicator
This indicator illuminates when your boat is connected to a working
shore power source.
3.3.2.8 Reverse Polarity Indicators
If reverse polarity occurs, immediately switch the Shore 1 and Shore 2
circuit breaker groups “OFF.” Refer to “3.1.4 Shore Power” for more
information.
Reverse polarity can occur only if your boat was built for use in Europe.
The Line 1 and Line 2 circuits are designed to sense the voltage
difference between the neutral and ground terminal blocks. If the
shore power source is incorrectly wired so that the polarity is re-
versed, the red Reverse Polarity light in the shore power source box
illuminates. If reverse polarity occurs while your boat is connected to
shore power, the Reverse Polarity lights on the AC Control Center
illuminate.
3.3.2.9 Generator Running Indicator
This indicator illuminates when the generator is operating.
3.3.2.10 Receptacles Galley
This breaker controls the flow of electricity to the receptacles in the
galley. Switch this breaker “ON” to supply power to these receptacles.
Use the receptacles as you would the outlets in your home.
NOTE: If this circuit breaker is “ON” but power is not available at any of
the receptacles in this group, the circuit’s GFCI breaker may have tripped.
Refer to 3.4 Ground Fault Circuit Interrupters for more information.
3.3.2.11 Receptacles Guest Stateroom
This breaker controls the flow of electricity to the receptacles in the
forward stateroom, third stateroom, and starboard head. Switch this
breaker “ON” to supply power to these receptacles. Use the receptacles
as you would the outlets in your home.