Carver 56 Voyager SE, Руководство пользователя

Страница: 59 / 209

S
ECTION
2 DC E
LECTRICAL
S
YSTEM
5627 5/04
2.2.2.43 Bridge DC Outlet
This breaker controls the flow of electricity to the 12-volt outlet located
at the bridge helm. You can operate various types of 12-volt equipment
from the outlet, such as a cellular phone, hand-held spotlight, and laptop
computer. Switch this breaker “ON” to activate the outlet.
2.2.2.44 Satellite Stereo
This breaker controls the flow of electricity to the satellite radio system
which is part of the salon entertainment center. To supply power to the
system, switch this breaker “ON.” Refer to the OEM information for
details on using the satellite radio system.
2.2.2.45 Bridge Stereo
This breaker controls the flow of electricity to the optional stereo at the
bridge helm. To supply power to the stereo, switch this breaker “ON.”
Refer to the OEM information for details on using the stereo.
2.2.2.46 Autopilot
This breaker controls the flow of electricity to the optional automatic
piloting system. To supply power to the autopilot, switch this breaker
“ON.” Refer to the OEM information for details on operating the autopi-
lot.
2.2.2.47 Bridge VHF Radio
This breaker controls the flow of electricity to the optional VHF radio at
the bridge helm. To supply power to the radio, switch this breaker “ON.”
Refer to the OEM information for details on operating the radio.
2.2.2.48 Radar
This breaker controls the flow of electricity to the optional radar system.
To supply power to the radar, switch this breaker “ON.” Refer to the
OEM information for details on operating the radar.
2.2.2.49 Chart Plotter
This breaker controls the flow of electricity to the optional chart plotter
system. To supply power to this system, switch this breaker “ON.” Refer
to the OEM information for details on operating the chart plotter.
2.2.2.50 Ray Data Repeater
This breaker controls the flow of electricity to the optional data repeater
system installed at the bridge helm. To supply power to this system,
switch this breaker “ON.” Before activating the data repeater, first