background image

S

ECTION

 

5

P

ROPULSION

5627 11/03

5.6.4 Voltmeter

The voltmeter displays the amount of charge in the engine’s battery (or

pair of batteries, if your boat has Volvo D12 engines). As a battery is

used, its indicated voltage decreases. Each engine battery has its own

voltmeter. Refer to 

2.1.5 Monitoring Battery Voltage Levels

 for

details on operating the voltmeters.

5.6.5 Fuel Gauge

The fuel gauge displays the approximate amount of fuel in the engine’s

fuel tank. This gauge is not calibrated and should not be regarded as an

accurate method of measuring the amount of fuel in the tank. Both fuel

gauges are “OFF” until the ignition switch for the port engine is turned

to the “ON” position.

5.6.6 Gauge Maintenance

The gauges on the bridge helm instrument panel should be protected

from the sun and weather when not in use. The gauges are not water-

proof. Protecting them from the elements prolongs their life.

NOTE:

 Small beads of moisture (condensation) can form behind the glass

bezel on some gauges. This does not mean the gauge is defective. The

Carver Limited Warranty does not cover the replacement of gauges that

are cosmetically affected by condensation.

The gauges can be affected by static electricity that may build up on their

glass bezels. To help reduce the static electricity and thus improve the

gauges’ accuracy, periodically wash the bezels with warm water and a

mild liquid detergent.

Содержание 56 Voyager SE


















































































































































































































Отзывы: