Carver 56 Voyager SE, Руководство пользователя

Страница: 107 / 209

S
ECTION
4 I
NTERNAL
S
YSTEMS
5627 12/03
Do not operate the air conditioning system’s water pump when the sea-
cock that supplies seawater to the system is closed. Operating the pump
with no seawater can damage it.
6. On the AC Control Center:
a. Switch the A/C Water Pump circuit breaker “ON.”
b. Switch the A/C Compressor 1, A/C Compressor 2 and, if present,
Bridge A/C Unit circuit breakers “ON.”
7. Verify that seawater is being pumped through the air conditioning
units. As the seawater exits the units, it flows out of the discharge
thru-hull fittings in the boat’s hull. Refer to 9.7.3 Thru-Hull Fit-
tings for the location of these thru-hull fittings.
8. Use the controls for each air conditioning unit to set the desired
temperature. The controls are located in the dinette, pilothouse,
master stateroom, VIP stateroom and on the bridge (if the bridge
chiller is present). Refer to the OEM information for details on
operating the air conditioning controls.