Carver 56 Voyager SE, Руководство пользователя

Страница: 85 / 209

S
ECTION
3 AC E
LECTRICAL
S
YSTEM
5627 5/04
NOTE: If this circuit breaker is “ON” but power is not available at any of
the receptacles in this group, the circuit’s GFCI breaker may have tripped.
Refer to 3.4 Ground Fault Circuit Interrupters for more information.
3.3.2.12 Range
This breaker controls the flow of electricity to the galley’s stove . Switch
this breaker “ON” to supply power to the stove. Refer to the OEM infor-
mation for details on operating the stove.
3.3.2.13 Water Heater
Do not supply power to the water heater when it is empty. Doing so may
damage the unit’s heating element. Refer to “4.2 Fresh Water System” to
fill, pressurize and prime the fresh water system before turning on the
water heater.
A T
IP
F
ROM
C
ARVER
!
Whenever your water heater has been winterized for storage, or your fresh
water tanks are empty, Carver recommends taping the Water Heater breaker in
the “OFF” position. This helps prevent the breaker from accidentally being
switched “ON” when no water is in the water system.
This breaker controls the flow of electricity to the water heater. The
water heater supplies hot water to your fresh water system. Switch this
breaker “ON” to supply power to the water heater. Refer to the OEM
information for details on operating the water heater.
3.3.2.14 Trash Compactor
This breaker controls the flow of electricity to the optional trash compac-
tor located in the galley . Switch this breaker “ON” to supply power to the
trash compactor. Refer to the OEM information for details on operating
the trash compactor.
3.3.2.15 Washer
This breaker controls the flow of electricity to the optional clothes
washer located in the master stateroom. Switch this breaker “ON” to
supply power to the washer. Refer to the OEM information for details on
operating the washer.
3.3.2.16 Main Battery Charger
This breaker controls the flow of electricity to the battery charger that
maintains the voltage levels in the generator battery. If your boat does