Carbide 3D Shapeoko XXL, Руководство пользователя

Страница: 82 / 110

Y-Axis Limit Switch
The Y-Axis Limit Switch mounts to the Right Y-Axis
Carriage. When attaching the switch to the
carriage, the switch goes to the OUTSIDE. If placed
on the inside, the switch will not activate when the
carriage reaches the rear End Plate.
Complete the installation by tightening the screws
into the integrated threaded holes. When
tightening the screws, insure the plate stays
roughly perpendicular to the left Y-Axis Rail. Slowly
slide the gantry to the back of the machine to
ensure that the switch makes contact with the rear
End Plate.
PROTIP: Before you can use the homing
feature, homing will need to be enabled in the