Carbide 3D Shapeoko XXL, Руководство пользователя

Страница: 52 / 110

Completing Rail Assembly
Once the Y-Left and Y-Right rails are loosely
secured in place, use the remaining twelve (12x)
M6x12mm BHCS to completley secure the rails to
the baseframe. Do this by installing 3 additional
screws into each end of the end plates. Each
extrusion should be secured with 4 screws at each
end.
Do not completely tighten these screws, we’ll need
some adjustment later when we begin to square
the machine.
Previous Step Back to Index Next Step