Carbide 3D Shapeoko XXL, Руководство пользователя

Страница: 106 / 110

To install the router into the Shapeoko XXL, you
must push
DOWN on the Z-axis carriage until it has
reached the bottom of its travel. This will provide
enough clearance to install the router into the
spindle mount.
WARNING: Be careful not to let go of the Z-axis
carriage when you are pushing it down to
install the spindle. The carriage is spring loaded
and if released with slam violently against the
end posts. Although this will likely not cause
damage, it is
not recommended!
Push the spindle all the way down into the mount.
The spindle mount should be gripping the Dewalt
at the very top of the body, just before it begins to
taper out.