Carbide 3D Shapeoko XXL, Руководство пользователя

Страница: 97 / 110

Measuring from the motor mounted on the Right
Y-Axis Carriage (when viewed from the back of the
Shapeoko XXL), the tie downs should be positioned
at the following locations (in inches from the
motor): 4”, 14”, 26”, 36”
Using the image above as a reference, zip tie all of
the cables at each of the locations shown above.
Trim down each of the zip tie ends with a pair of
flush cut pliers. Be careful not to cut or knick the
cables, as they are very sensitive to damage.
Apply Decals
Your Shapeoko XXL comes with a unique Serial Tag
Decal. Peel and apply the decal to the inside of the
Y-Left Rail, as shown.