Carbide 3D Shapeoko XXL, Руководство пользователя

Страница: 43 / 110

There is no need to tighten the bolts completely.
Later in the installation, you will “square” the
machine and tighten all bolts.
Installing the X/Z Carriage
Carefully slide the X/Z Carriage onto the X-Axis
Extrusion Rail as shown in the image below. Use
the empty carriage boxes to support the rail and be
careful not to let the X/Z Carriage slide into the Y-
Axis Left Carriage.
Aligning the V-wheels on the X/Z assembly with the
V-rail on the X-axis extrusion, slowly slide the
assembly onto the rail. Pay special attention to the
wheels to ensure the V-rail is seated in the V of
both the top and bottom wheels.