Cantel Medical MEDIVATORS DSD EDGE, Руководство по обслуживанию

Страница: 22 / 152

22
Function Keys
The function keys control the operation of the reprocessor.
• ID Data
Press this button to enter the endoscope identification or serial number, operator ID number, patient ID number,
and physician ID number into the log. Each ID entry can contain up to ten digits. This function is only active
when the station is idle.
• Program
Press this button to select a disinfection program. Enter the program number on the keypad. This function is only
active when the station is idle.
• Add Air
When the station is idle press this button, then the START button to air purge the endoscope. Otherwise, this
function will append an add air cycle to the end of the currently running cycle. Pressing the button again will
remove the add air cycle.
• Set Up
Press this button to access system functions.
• Enter
Press this button to accept settings, or to start some system functions.
• Cancel
Press this button to reject settings, reset an alarm, or abort a disinfection cycle.
• Reject an incorrect user entry by pressing the CANCEL button. The previous value is restored, or the
previous screen is displayed.
• Abort the currently running cycle by pressing the CANCEL button, then the ENTER button.
• Reset an alarm by pressing the CANCEL button, then the ENTER button.
• Station Select
Press this button to select Station A or Station B.
• Start
Press this button to start a disinfection cycle or resume an interrupted cycle, or to start some
system functions.
• Stop
Press this button to pause a disinfection cycle, acknowledge a warning message, or stop a
system function.
• HLD Pass
Upon verification that the disinfectant sample met the MRC using a test strip, press this
button to confirm.
• HLD Fail
Press this button if the disinfectant sample failed to meet MRC upon test strip verification. This information is
recorded with the reprocessor log.