Cantel Medical MEDIVATORS DSD EDGE, Руководство по обслуживанию

Страница: 137 / 152

137
Phase Option Description Default Typical
Min.
Limit
Max.
Limit
Setting
State
#
Function
#
Rinse 2 Endoscope channel flush with water 30 sec 30 sec 0 sec 999 sec Factory Set 51 Diag. 63
Basin fill minimum (level sensor not monitored) 90 sec 90 sec* 0 sec 999 sec Factory Set 100 Diag. 62
Basin fill balance (sensor monitored) 5 min 10 sec* Hard Coded 101
Top off 30 sec 30 sec 0 sec 999 sec Factory Set 102 Diag. 67
Replenish with fresh water
0 sec 0 sec 0 sec 99m:59s User Set 103 Setup 5
Rinse 2
Drain the basin while flushing the scope
channels 30 sec 30 sec 0 sec 999 sec Factory Set 96 Diag. 61
Drain 30 sec 30 sec Hard Coded 97
Air purge through chamber line 5 sec 5 sec Hard Coded 92
Endoscope channel air purge 30 sec 30 sec 0 sec 999 sec Factory Set 94 Diag. 63
Clear air lines 5 sec 5 sec Hard Coded 95
Rinse 3 Endoscope channel flush with water 30 sec 30 sec 0 sec 999 sec Factory Set 53 Diag. 63
Basin fill minimum (level sensor not monitored) 90 sec 90 sec* 0 sec 999 sec Factory Set 100 Diag. 62
Basin fill balance (sensor monitored) 5 min 10 sec* Hard Coded 101
Top off 30 sec 30 sec 0 sec 999 sec Factory Set 102 Diag. 67
Replenish with fresh water
0 sec 0 sec 0 sec 99m:59s User Set 103 Setup 5
Rinse 2
Drain the basin while flushing the scope
channels 30 sec 30 sec 0 sec 999 sec Factory Set 96 Diag. 61
Drain 30 sec 30 sec Hard Coded 97
Air purge through chamber line 5 sec 5 sec Hard Coded 92
Endoscope channel air purge 30 sec 30 sec 0 sec 999 sec Factory Set 94 Diag. 63
Clear air lines 5 sec 5 sec Hard Coded 95
Alcohol
Alcohol dispensing into manifold
10 sec 10 sec 0 sec 59 sec User Set 55 Setup 5
Alcohol Inject
Endoscope channel alcohol purge
0 sec 0 sec 0 sec 99m:59s User Set 56 Setup 5
Alcohol
Clear air lines 5 sec 5 sec Hard Coded 57
Air Air purge through chamber lines 5 sec 5 sec Hard Coded 58
Endoscope channel air purge
3 min 3 min 0 sec 99m:59s User Set 60 Setup 5
Air
Clear air lines 5 sec 5 sec Hard Coded 61
1 - The time in the Typical column where an * symbol is indicated, is subject to how fast the basin fills. An alarm will occur when default time is reached.
2 - Selecting zero time during Setup 5 will cancel all accompanying states in the phase.
3 - The “FLUSH” message is displayed in the Phase column indicates that the state is only active when the SOAK time is set to zero.
4 - States with a leak test option are active if the unit is provided with the Leak Tester and the sheath sensor is enabled in the diagnostics mode.