Canon XF705, Инструкция по эксплуатации

Страница: 158 / 231

Connecting to a Wi-Fi Networ k
158
Manual S etup
If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the
instructions on the screen to complete the procedure.
1 Enter the acce ss point' s SS ID (networ k name).
[Input]
>
Enter the network name using the keyboard screen (
A
27)
>
[OK]
2 S elect the authentication method and then pre ss S ET.
• If you selected [Open], select [WEP], press SET and continue the procedure, or select [No Encryption], press
SET and continue with the procedure to configure the IP address assignment (
A
155).
3 S elect the WEP index or encryption method, depending on the s elected authentication mode.
• [Shared Key]/[WEP]: Select the WEP index and then press SET.
• [WPA-PSK]/[WPA2-PSK]: Select [TKIP] or [AES] and then press SET.
4 Enter the encryption k ey (pa ss word).
[Input]
>
Enter the password using the keyboard screen (
A
27)
>
[OK]
5 Continue with the procedure to configure the IP addre ss a ss ignment (
A
155).
NOTES
Valid passwords vary depending on the encryption method.
64-bit WEP encryption: 5 ASCII characters or 10 hexadecimal characters.
128-bit WEP encryption: 13 ASCII characters or 26 hexadecimal characters.
AES / TKIP encryption: 8 to 63 ASCII characters or 64 hexadecimal characters.
* Note: ASCII characters include the numbers 0 to 9, the letters a to z and A to Z and some punctuation marks and special
symbols. Hexadecimal characters comprise the numbers 0 to 9 and the letters a to f and A to F.