Canon XF705, Инструкция по эксплуатации

Страница: 133 / 231

133
Playbac k
1 Press the INDEX button.
• The index screen selection menu will appear.
2 Select the desired index screen and then press SET.
• The selected index screen appears.
• Select [Cancel] instead to cancel the operation.
Playing Back Clip s
After you select a clip to play back from the index screen, you can
control the playback with the buttons on the camcorder or with the
joystick and onscreen joystick guide (
A
135). You can also use the
supplied wireless controller.
1 Move the orange s election frame to the clip you want to play
bac k .
2 Pre ss the Ò button to s tart playbac k .
• Playback will start.
• Press the
Ò
button again or press SET to pause/resume
the playback.
• When the selected clip ends, playback will continue
automatically to the next clip. When the last clip in the index
screen ends, playback will be paused.
• Press the
Ñ
button to stop the playback and return to the index screen.
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• You may notice brief stops in video or audio playback between clips.
• Depending on the clip, the camcorder may adjust some controls internally to display a more suitable image on
the LCD screen and viewfinder.
- When the [Gamma] setting in the custom picture file is set to a setting other than [Canon Log 3], the
camcorder will produce an image that approximates the look of video displayed on a compatible monitor
correctly configured.
- When the [Gamma] setting in the custom picture file is set to [Canon Log 3], the camcorder will produce
colors that approximate the look of the BT.709 color space, regardless of the color space used for
recording.