Canon XF705, Инструкция по эксплуатации

Страница: 104 / 231

Color s Bar s /Audio Reference S ignal
104
Color s Bar s / A udio Reference S ignal
You can have the camcorder generate color bars and a 1 kHz audio reference signal and output them from the
SDI terminal, HDMI OUT terminal and
×
(headphone) terminal*.
* Audio reference signal only.
Color Bar s
The camcorder offers 3 types of color bars (SMPTE, EBU or ARIB).
1 S elect [Color Bar Type].
>
[
v '
Camera Setup]
>
[Color Bar Type]
2 S elect the type of color bar s and then pre ss S ET.
3 To activate the color bar s , s elect [Color Bar s ].
>
[
v '
Camera Setup]
>
[Color Bars]
4 S elect [On] and then pre ss S ET.
• The selected color bars appear on the screen and will be recorded when you press the REC button.
• Turning off the camcorder or changing the operating mode to mode will deactivate the color bars.
NOTES NOTES
• You cannot change the type of color bars while recording or when pre-recording is activated.
• You cannot turn the color bars on and off while recording.
• If you set an assignable button to [Color Bars] (
A
117), you can press the button to turn the color bars on/off.
A udio Reference S ignal
The camcorder can output a 1 kHz audio reference signal with the color bars.
1 S elect [1 k Hz Tone].
>
[
¡ %
Audio Setup]
>
[1 kHz Tone]
2 S elect the de s ired level and then pre ss S ET.
• You can select one of three audio levels (–12 dB, –18 dB, –20 dB) or [Off] to turn off the signal.
• The reference signal will be output at the selected level when you display the color bars, and will be recorded
when you press the REC button.
Operating modes: